English
Español
(86)0571-85229813
+571-85229813
We produce Encapsulated Transformer, High frequency switching transformer, Low frequency power transformer ,inductor and current transformer.
Pulse Flyback Transformer
A Pulse Flyback Transformer is a power transformer with a ringless design that allows the secondary current to discharge to zero. These transformers can work in continuous or discontinuous modes. Continuous mode transformers have a trapezoidal current waveform and are often used in power supply transformers.
Coil craft's flyback transformers
Pulse flyback transformers are a popular choice for applications where low output current and power are necessary. These transformers range in size from a few Watts to 120 Watts and have various topologies. They are generally made with a buck/boost, push-pull, or full-bridge topology. They are also RoHS-compliant, CSA-approved, UL-listed, and manufactured in the USA.
The main advantage of these transformers is that they allow the user to adjust the frequency and duty cycle of their output current. This allows the user to change the current without affecting the output voltage of the device. The flyback transformer's voltage and current are controlled using diodes, which ensure a unidirectional current flow. Additionally, capacitors are installed at the input and output ends of the current flow, which allow the user to regulate the amount of energy released and stored.
Pulse flyback transformers are designed to store energy during the first half of the switching cycle, and then release this energy to the secondary winding, which is connected to the load. The flyback transformer's gapped-core design allows for a high amount of energy storage while maintaining safety. This is a major difference between flyback transformers and forward-mode transformers, which transfer energy directly from the primary winding to the secondary.
Ringless design of flyback transformers
A ringless flyback transformer, also called a pulse flyback transformer, is a voltage source that features a ringless design. This type of transformer has three main windings: a primary winding, a boost winding, and a tertiary winding. Its tertiary winding is made up of multiple sets of wires and is connected by diodes. This configuration results in low leakage inductance and stray capacitance.
A ringless flyback transformer can operate over a wide frequency range. Its ringless design also enables the use of pulse width modulation to avoid beat-frequency images in video displays. In addition, it can be used for powering TVs, monitors, and any apparatus that needs a high voltage-regulated power supply.
Flyback transformers are commonly used for improving the performance of electric motors and generators. They are also widely used in the renewable energy industry. In particular, their secondary voltage has enormous potential for charging battery units with low time constants.
Typical applications for flyback transformers
A pulse flyback transformer is a type of power transformer. This type of transformer is used to transform DC power into a higher voltage current. These devices are energized with a DC pulse through a rectifying circuit, which comprises electronic devices like MOSFETs. They are commonly used in the telecommunication industry, where they are used to convert the signal from one frequency to another.
A pulse flyback transformer is built using primary winding, a secondary winding, and a rectifying unit. The primary winding is usually of a lower voltage than the secondary one, and the secondary winding has higher turns. These devices can handle a higher voltage than conventional transformers, and they are ideal for a variety of applications.
When designing a pulse transformer, designers strive to minimize the amount of voltage droop, rise time, and pulse distortion. Voltage droop occurs when the output pulse voltage falls over the duration of the pulse, due to the magnetizing current, load current, and leakage inductance. These effects, combined with the influence of a capacitor and load, create pulse distortion. To minimize the effects of these problems, pulse transformer designers must understand their voltage-time product.
EF12~25 EF Type Mini Electronics smd pulse flyback transformer
EF12~25 EF Type Mini Electronics smd pulse flyback transformer
· input voltage -85V〜265V/AC, 50/60Hz
· Output voltage - 3.3V~36V/DC
· Po- 100W Max.
· Product features - With high working frequency, high efficiency, small size, light weight and other characteristics
·Standard-UL,VDE, RoHS, 3C, CQC
charger/ Electric vehicle control panel/ air purifier